Output Details and Examples — EnergyPlus 8.7

<< Prev | Table of Contents | Next >>

eplusout.dbg[LINK]

Developers use this file during debugging and can be “turned on” by the DEBUG OUTPUT object in the input file. The only reason a user might specify this flag would be to send a file to the support group.

Output:DebuggingData, 1, 0; ! standard debug output, during simulation days

The standard debug output appears like this:

Day of Sim Hour of Day Time

1 1 0.166666666666667

node # Temp MassMinAv MassMaxAv TempSP MassFlow MassMin MassMax MassSP Press Enthal HumRat Fluid Type

1 -12.500 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 100344.00 -9363.63 0.00129 Air

2 -12.500 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 100344.00 -9363.63 0.00129 Air

3 -12.500 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 100344.00 -9363.63 0.00129 Air

4 -12.500 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 100344.00 -9363.63 0.00129 Air

5 50.000 0.000 0.000 0.000 0.0320 0.0000 0.0000 0.0000 100344.00 60617.55 0.00400 Air

6 50.000 0.000 0.000 0.000 0.0326 0.0000 0.0000 0.0000 100344.00 60617.55 0.00400 Air

7 50.000 0.000 0.000 0.000 0.1636 0.0000 0.0000 0.0000 100344.00 60617.55 0.00400 Air

8 50.000 0.000 0.000 0.000 0.1648 0.0000 0.0000 0.0000 100344.00 60617.55 0.00400 Air

9 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.00 0.00 0.00000 blank

10 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.00 0.00 0.00000 blank

11 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.00 0.00 0.00000 blank

12 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.00 0.00 0.00000 blank