Refrigeration[LINK]
Condenser Operation[LINK]
An actuator called “Refrigeration:System”
is available with a control type called “Minimum Condensing
Temperature.” The units for this actuator are degrees
Celsius. This actuator is available in models that use the Refrigeration:System
object. This actuator allows the user to override the usually
constant value that is input into the field called Minimum
Condensing Temperature in the Refrigeration:System
object. This allows operating the condenser using custom
control algorithms.
Refrigeration[LINK]
Condenser Operation[LINK]
An actuator called “Refrigeration:System” is available with a control type called “Minimum Condensing Temperature.” The units for this actuator are degrees Celsius. This actuator is available in models that use the Refrigeration:System object. This actuator allows the user to override the usually constant value that is input into the field called Minimum Condensing Temperature in the Refrigeration:System object. This allows operating the condenser using custom control algorithms.
Documentation content copyright © 1996-2026 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.