Variable Types[LINK]
Various types of output variables in EnergyPlus can be used as sensors in the EMS. It is important to understand some distinctions.
Reported variables have two update frequencies: zone and system. Zone variables are updated for each zone timestep. System variables are updated for each system timestep.
Reported variables have two types of content: averaged and summed. Averaged variables are state variables such as temperature and mass flow rate. Summed variables are quantities of energy such as electricity use.
Variable Types[LINK]
Various types of output variables in EnergyPlus can be used as sensors in the EMS. It is important to understand some distinctions.
Reported variables have two update frequencies: zone and system. Zone variables are updated for each zone timestep. System variables are updated for each system timestep.
Reported variables have two types of content: averaged and summed. Averaged variables are state variables such as temperature and mass flow rate. Summed variables are quantities of energy such as electricity use.
Documentation content copyright © 1996-2023 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.