Other Acknowledgments[LINK]
This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building Technologies of the US Department of Energy – under the guidance of Dru Crawley from inception through March 2010.
Additional support was provided by the Gas Technology Institute and the California Energy Commission.
The ice thermal storage module development was supported by the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability.
The HAMT (Heat And Moisture Transfer) model was supported by the Engineering and Physical Sciences Research Council (EPSRC), the UK government agency for funding research and training in engineering and the physical sciences.
The SQLite output module was funded by Building Synergies, LLC and was made possible by inclusion of software code from the SQLite project (http://www.sqlite.org/).
The building-integrated photovoltaic thermal (BIPVT) model was contributed by CanmetENERGY-Ottawa, Natural Resources Canada (https://www.nrcan.gc.ca/energy/offices-labs/canmet/ottawa-research-centre/5753). See SolarCollectorPerformance:PhotovoltaicThermal:BIPVT and Pull Request 9594 (https://github.com/NREL/EnergyPlus/pull/9594).
The fuel-fired absorption heat pump (HeatPump:AirToWater:FuelFired:Heating and Cooling) model development was funded by Utilization Technology Development (https://www.utd-co.org) on a subcontract with GTI Energy (https://www.gti.energy/). See Pull Request 9405 (https://github.com/NREL/EnergyPlus/pull/9405).
Other Acknowledgments[LINK]
This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building Technologies of the US Department of Energy – under the guidance of Dru Crawley from inception through March 2010.
Additional support was provided by the Gas Technology Institute and the California Energy Commission.
The ice thermal storage module development was supported by the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability.
The HAMT (Heat And Moisture Transfer) model was supported by the Engineering and Physical Sciences Research Council (EPSRC), the UK government agency for funding research and training in engineering and the physical sciences.
The SQLite output module was funded by Building Synergies, LLC and was made possible by inclusion of software code from the SQLite project (http://www.sqlite.org/).
The building-integrated photovoltaic thermal (BIPVT) model was contributed by CanmetENERGY-Ottawa, Natural Resources Canada (https://www.nrcan.gc.ca/energy/offices-labs/canmet/ottawa-research-centre/5753). See SolarCollectorPerformance:PhotovoltaicThermal:BIPVT and Pull Request 9594 (https://github.com/NREL/EnergyPlus/pull/9594).
The fuel-fired absorption heat pump (HeatPump:AirToWater:FuelFired:Heating and Cooling) model development was funded by Utilization Technology Development (https://www.utd-co.org) on a subcontract with GTI Energy (https://www.gti.energy/). See Pull Request 9405 (https://github.com/NREL/EnergyPlus/pull/9405).
Documentation content copyright © 1996-2024 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.