Air Loop Simulation Environment Variables[LINK]
To facilitate comparing the runtime performance of various solution techniques for the air loop simulation a mechanism to track runtime statistics has been implemented in EnergyPlus. To facilitate debugging the air loop simulation a tracing mechanism operating either at the air loop-level or at the controller-level has been implemented in EnergyPlus. To use, one uses the “Set” command and the value as indicated.
Setting to “yes” will cause EnergyPlus to track the performance of the air loop simulation at runtime and dump the results in a file named “statistics.HVACControllers.csv” upon ending the simulation. (Uses logical variable TrackAirLoopEnvFlag in module DataSystemVariables).
Set TRACK_AIRLOOP=yes
TRACE_AIRLOOP: Air loop simulation tracer[LINK]
Setting to “yes” will cause EnergyPlus to write to a trace file named “controller..csv” the converged solutions of all controllers defined on each air loop, at each HVAC iteration. (Uses logical variable TraceAirLoopEnvFlag in module DataSystemVariables).
Set TRACE_AIRLOOP=yes
TRACE_HVACCONTROLLER: Individual HVAC controller tracer[LINK]
Setting to “yes” will cause EnergyPlus to write to a trace file named “controller..csv” a detailed description of each controller iteration at each HVAC iteration. (Uses logical variable TraceControllerEnvFlag in module DataSystemVariables).
Set TRACE_HVACCONTROLLER=yes
Air Loop Simulation Environment Variables[LINK]
To facilitate comparing the runtime performance of various solution techniques for the air loop simulation a mechanism to track runtime statistics has been implemented in EnergyPlus. To facilitate debugging the air loop simulation a tracing mechanism operating either at the air loop-level or at the controller-level has been implemented in EnergyPlus. To use, one uses the “Set” command and the value as indicated.
TRACK_AIRLOOP: Runtime performance tracker for air loop simulation[LINK]
Setting to “yes” will cause EnergyPlus to track the performance of the air loop simulation at runtime and dump the results in a file named “statistics.HVACControllers.csv” upon ending the simulation. (Uses logical variable TrackAirLoopEnvFlag in module DataSystemVariables).
TRACE_AIRLOOP: Air loop simulation tracer[LINK]
Setting to “yes” will cause EnergyPlus to write to a trace file named “controller..csv” the converged solutions of all controllers defined on each air loop, at each HVAC iteration. (Uses logical variable TraceAirLoopEnvFlag in module DataSystemVariables).
TRACE_HVACCONTROLLER: Individual HVAC controller tracer[LINK]
Setting to “yes” will cause EnergyPlus to write to a trace file named “controller..csv” a detailed description of each controller iteration at each HVAC iteration. (Uses logical variable TraceControllerEnvFlag in module DataSystemVariables).
Documentation content copyright © 1996-2014 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.