Getting Started[LINK]
If you’re familiar with building simulation, use the 300+ example files that come with the program and the Input/Output Reference to help you.
If you’re new to building simulation, read and work through the tutorials in the “Getting Started” document or visit the online tutorial, http://www.vibyor.com (tutorial was created by Prof. Vishal Garg from IIIT Hyberabad, India).
Another avenue you might use is the EnergyPlus Example File Generator (EEFG) program, which will not only produce an input file for your later use, but also run your specifications on EnergyPlus and send you the results. EEFG is available through the interface page referenced above or http://apps1.eere.energy.gov/buildings/energyplus/cfm/inputs/
Getting Started[LINK]
If you’re familiar with building simulation, use the 300+ example files that come with the program and the Input/Output Reference to help you.
If you’re new to building simulation, read and work through the tutorials in the “Getting Started” document or visit the online tutorial, http://www.vibyor.com (tutorial was created by Prof. Vishal Garg from IIIT Hyberabad, India).
Another avenue you might use is the EnergyPlus Example File Generator (EEFG) program, which will not only produce an input file for your later use, but also run your specifications on EnergyPlus and send you the results. EEFG is available through the interface page referenced above or http://apps1.eere.energy.gov/buildings/energyplus/cfm/inputs/
Documentation content copyright © 1996-2015 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.