This file contains the “meter details” for the run. This shows what report variables are on which meters and vice versa – which meters contain what report variables.
          The meter details file consists of two parts:
          
          - For report variables that are on meters, it shows all the meters that the report variable is on.  In the following example, “Meters for” <report variable #>, <report variable name> is shown and then the meters that accumulate the value of that variable as a “meter”.
Meters for 1240,SPACE1-1:Lights-Electric Energy [J]
 OnMeter = Electricity:Facility [J]
 OnMeter = Electricity:Building [J]
 OnMeter = Electricity:Zone:SPACE1-1 [J]
 OnMeter = InteriorLights:Electricity [J]
 OnMeter = InteriorLights:Electricity:Zone:SPACE1-1 [J]
Meters for 1460,SPACE1-1:Zone Air System Sensible Heating Energy [J]
 OnMeter = EnergyTransfer:Facility [J]
 OnMeter = EnergyTransfer:Building [J]
 OnMeter = EnergyTransfer:Zone:SPACE1-1 [J]
 OnMeter = Heating:EnergyTransfer [J]
Meters for 1557,SPACE1-1 ZONE COIL:Heating Coil Heating Energy [J]
 OnMeter = EnergyTransfer:Facility [J]
 OnMeter = EnergyTransfer:HVAC [J]
 OnMeter = HeatingCoils:EnergyTransfer [J]
          
          - For each meter, the report variables that make up that meter are shown. In the following example, “For Meter =” <name of meter>, “contents are:” and then each variable that occurs on that “meter” are shown.
For Meter = Electricity:Facility [J], contents are:
  SPACE1-1 LIGHTS 1:Lights Electric Energy
  SPACE2-1 LIGHTS 1:Lights Electric Energy
  SPACE3-1 LIGHTS 1:Lights Electric Energy
  SPACE4-1 LIGHTS 1:Lights Electric Energy
  SPACE5-1 LIGHTS 1:Lights Electric Energy
  SPACE1-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE2-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE3-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE4-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE5-1 ELECEQ 1:Electric Equipment Electric Energy
  SUPPLY FAN 1:Fan Electric Energy
  CENTRAL CHILLER:Chiller Electric Energy
  HW CIRC PUMP:Pump Electric Energy
  CW CIRC PUMP:Pump Electric Energy
 For Meter = Electricity:Building [J], contents are:
  SPACE1-1 LIGHTS 1:Lights Electric Energy
  SPACE2-1 LIGHTS 1:Lights Electric Energy
  SPACE3-1 LIGHTS 1:Lights Electric Energy
  SPACE4-1 LIGHTS 1:Lights Electric Energy
  SPACE5-1 LIGHTS 1:Lights Electric Energy
  SPACE1-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE2-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE3-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE4-1 ELECEQ 1:Electric Equipment Electric Energy
  SPACE5-1 ELECEQ 1:Electric Equipment Electric Energy
 For Meter = Electricity:Zone:SPACE1-1 [J], contents are:
  SPACE1-1 LIGHTS:Lights Electric Energy
  SPACE1-1 ELECEQ:Electric Equipment Electric Energy
 For Meter = InteriorLights:Electricity [J], contents are:
  SPACE1-1 LIGHTS:Lights Electric Energy
  SPACE2-1 LIGHTS:Lights Electric Energy
  SPACE3-1 LIGHTS:Lights Electric Energy
  SPACE4-1 LIGHTS:Lights Electric Energy
  SPACE5-1 LIGHTS:Lights Electric Energy
For Meter = Gas:Facility [J], contents are:
  CENTRAL BOILER:Boiler Gas Energy
 For Meter = Gas:Plant [J], contents are:
  CENTRAL BOILER:Boiler Gas Energy
 For Meter = Heating:Gas [J], contents are:
  CENTRAL BOILER:Boiler Gas Energy
 For Meter = Electricity:Plant [J], contents are:
  CENTRAL CHILLER:Chiller Electric Energy
  HW CIRC PUMP:Pump Electric Energy
  CW CIRC PUMP:Pump Electric Energy
 For Meter = Cooling:Electricity [J], contents are:
  CENTRAL CHILLER:Chiller Electric Energy
 For Meter = Cooling:EnergyTransfer [J], contents are:
  PLENUM-1:Zone Air System Sensible Cooling Energy
  SPACE1-1:Zone Air System Sensible Cooling Energy
  SPACE2-1:Zone Air System Sensible Cooling Energy
  SPACE3-1:Zone Air System Sensible Cooling Energy
  SPACE4-1:Zone Air System Sensible Cooling Energy
  SPACE5-1:Zone Air System Sensible Cooling Energy
          As further illustration, an abbreviated example shows:
          Meters for 6,EAST ZONE LIGHTS 1:Lights Electric Energy [J]
  OnMeter = Electricity:Facility [J]
  OnMeter = Electricity:Building [J]
  OnMeter = Electricity:Zone:EAST ZONE [J]
  OnMeter = InteriorLights:Electricity [J]
  OnMeter = InteriorLights:Electricity:Zone:EAST ZONE [J]
  OnMeter = GeneralLights:InteriorLights:Electricity [J]
For Meter = Electricity:Facility [J], ResourceType = Electricity, contents are:
  EAST ZONE LIGHTS 1:Lights Electric Energy
  NORTH ZONE LIGHTS 1:Lights Electric Energy
  WEST ZONE ELECEQ 1:Electric Equipment Electric Energy
  EAST ZONE ELECEQ 1:Electric Equipment Electric Energy
  NORTH ZONE ELECEQ 1:Electric Equipment Electric Energy
  SUPPLY FAN 1:Fan Electric Energy
  LITTLE CHILLER:Chiller Electric Energy
  BIG CHILLER:Chiller Electric Energy
  BIG TOWER:Cooling Tower Fan Electric Energy
  CIRC PUMP:Pump Electric Energy
  COND CIRC PUMP:Pump Electric Energy
  HW CIRC PUMP:Pump Electric Energy
          This shows the meters on which the Zone: Lights Electric Energy appear as well as the contents of the Electricity:Facility meter.
                    
         
        
eplusout.mtd[LINK]
This file contains the “meter details” for the run. This shows what report variables are on which meters and vice versa – which meters contain what report variables.
The meter details file consists of two parts:
As further illustration, an abbreviated example shows:
This shows the meters on which the Zone: Lights Electric Energy appear as well as the contents of the Electricity:Facility meter.
Documentation content copyright © 1996-2016 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.