Validation and Testing[LINK]
An important ongoing part of EnergyPlus development is testing using industry standard methods as major builds are completed. The goal is to make EnergyPlus as bug-free as possible. Three major types of tests are currently conducted:
Analytical tests:
HVAC tests, based on ASHRAE Research Project 865
Building fabric tests, based on ASHRAE Research Project 1052
Comparative tests:
ANSI/ASHRAE Standard 140-2007
International Energy Agency Solar Heating and Cooling Programme (IEA SHC) BESTest (Building Energy Simulation Test) methods not yet in Standard 140
EnergyPlus HVAC Component Comparative tests
EnergyPlus Global Heat Balance tests
Release and executable tests
For detailed reports, please use the following link:
http://apps1.eere.energy.gov/buildings/energyplus/energyplus_testing.cfm
Validation and Testing[LINK]
An important ongoing part of EnergyPlus development is testing using industry standard methods as major builds are completed. The goal is to make EnergyPlus as bug-free as possible. Three major types of tests are currently conducted:
Analytical tests:
HVAC tests, based on ASHRAE Research Project 865
Building fabric tests, based on ASHRAE Research Project 1052
Comparative tests:
ANSI/ASHRAE Standard 140-2007
International Energy Agency Solar Heating and Cooling Programme (IEA SHC) BESTest (Building Energy Simulation Test) methods not yet in Standard 140
EnergyPlus HVAC Component Comparative tests
EnergyPlus Global Heat Balance tests
Release and executable tests
For detailed reports, please use the following link:
http://apps1.eere.energy.gov/buildings/energyplus/energyplus_testing.cfm
Documentation content copyright © 1996-2016 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.