Converting Older Version EnergyPlus Files[LINK]
Can I convert an older file to a newer version of EnergyPlus?
If the older version is from the previous release, then yes. Use the pull-down File menu and select Transition. This will update the older file to the newer version.
If the older version is older than the previous release, then you must use the multiple transition program. You can download the transition programs from this site.
(That is http://energyplus.helpserve.com and go to the “downloads” area).
The Multiple Transition folder is set up on the EnergyPlus install.
Unzip the file into the MultipleTransition folder and use the IDF Converter GUI program to transition your older files. The IDF converter can also save the transitioned file for each intermediate version, if desired.
Converting Older Version EnergyPlus Files[LINK]
Can I convert an older file to a newer version of EnergyPlus?
If the older version is from the previous release, then yes. Use the pull-down File menu and select Transition. This will update the older file to the newer version.
If the older version is older than the previous release, then you must use the multiple transition program. You can download the transition programs from this site.
(That is http://energyplus.helpserve.com and go to the “downloads” area).
The Multiple Transition folder is set up on the EnergyPlus install.
Unzip the file into the MultipleTransition folder and use the IDF Converter GUI program to transition your older files. The IDF converter can also save the transitioned file for each intermediate version, if desired.
Documentation content copyright © 1996-2016 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.