High Level HVAC Calling Tree (schematic – not all routines are shown)[LINK]
ManageHVAC (in HVACManager)
- ZoneAirUpdate(‘PREDICT’, . . .) (in HVACManager)
estimate the zone heating or cooling demand
SimHVAC (in HVACManager)
ManageSetPoints (in SetPointManager)
SimSelectedEquipment (in HVACManager)
ManageAirLoops (in SimAirServingZones)
ManageZoneEquipment (in ZoneEquipmentManager)
ManageElectricLoadCenters (in ElectricPowerManager)
ManagePlantLoops (in PlantManager)
ZoneAirUpdate(‘CORRECT’, . . .) (in HVACManager)
From the amount of heating and cooling actually provided by the HVAC system, calculate the zone temperatures.
Each of the “Manage” routines has a different structure, since the simulation to be performed is different in each case. We will show schematic calling trees for several of the “Manage” routines.
High Level HVAC Calling Tree (schematic – not all routines are shown)[LINK]
ManageHVAC (in HVACManager)
estimate the zone heating or cooling demand
SimHVAC (in HVACManager)
ManageSetPoints (in SetPointManager)
SimSelectedEquipment (in HVACManager)
ManageAirLoops (in SimAirServingZones)
ManageZoneEquipment (in ZoneEquipmentManager)
ManageElectricLoadCenters (in ElectricPowerManager)
ManagePlantLoops (in PlantManager)
ZoneAirUpdate(‘CORRECT’, . . .) (in HVACManager)
From the amount of heating and cooling actually provided by the HVAC system, calculate the zone temperatures.
Each of the “Manage” routines has a different structure, since the simulation to be performed is different in each case. We will show schematic calling trees for several of the “Manage” routines.
Documentation content copyright © 1996-2020 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.