Transition Console
Program Details[LINK]
For those who are interested, this is the detailed
description of the Transition console applications including
the current one. There are methods to use the program set from
the command line; those details are not included in this
document but available from EnergyPlus Support group.
TransitionVA-B-C-to-VD-E-F.exe is the transition program
that converts files from version “A-B-C” to “D-E-F”, and is
distributed in the “D-E-F” installer package. It uses several
important files that are included in the “EnergyPlus”
installation folder, in the PreProcess/IDFVersionUpdator
subdirectory.
Transition files for current release
| File Name |
Description |
| TransitionVA-B-C-to-VD-E-F.exe |
The executable program |
| VA-B-C-Energy+.idd |
Base, starting, version
Energy+.idd file |
| VD-E-F-Energy+.idd |
Target, new idd file; Identical
to Energy+.idd when distributed |
| Report Variables A-B-C to
D-E-F.csv |
Report variable name
changes |
Another file “RulesA-B-C-to-D-E-F.xls” is not used directly
by the program but contains the “rules” for translating
objects from version A-B-C release to the D-E-F release. The
ObjectStatus file can also be viewed - it will show if deleted
objects are automatically transitioned to the new input file
versions.
There are several methods to executing the transition
program - these methods give you the most flexibility in
changing files from one version to the next. The easiest
transition is through the EP-Launch program which can detect
if the input file about to be run is of the same version as
the IDD or not and suggest transitioning. You can also
manually transition from the file menu in EP-Launch. (To have
this feature, you must also have the files from the preceding
table in the same folder as EP-Launch - which is usually the
folder that also has the EnergyPlus.exe program).
There are two command line methods to execute the
transition version (from the Command Prompt). One is to simply
use the file name you want transitioned (including .rvi or
.mvi file names) or you can use a file name with a .lst
extension and simply enter file names to be done in a text
file. When you execute the transition program in this fashion,
you will get the “typical” program defaults of a “full”
transition, field names will be shown at each field with
units, and any blank fields will be left blank rather than
filled in with the current defaults.
Transition Console Program Details[LINK]
For those who are interested, this is the detailed description of the Transition console applications including the current one. There are methods to use the program set from the command line; those details are not included in this document but available from EnergyPlus Support group.
TransitionVA-B-C-to-VD-E-F.exe is the transition program that converts files from version “A-B-C” to “D-E-F”, and is distributed in the “D-E-F” installer package. It uses several important files that are included in the “EnergyPlus” installation folder, in the PreProcess/IDFVersionUpdator subdirectory.
Another file “RulesA-B-C-to-D-E-F.xls” is not used directly by the program but contains the “rules” for translating objects from version A-B-C release to the D-E-F release. The ObjectStatus file can also be viewed - it will show if deleted objects are automatically transitioned to the new input file versions.
There are several methods to executing the transition program - these methods give you the most flexibility in changing files from one version to the next. The easiest transition is through the EP-Launch program which can detect if the input file about to be run is of the same version as the IDD or not and suggest transitioning. You can also manually transition from the file menu in EP-Launch. (To have this feature, you must also have the files from the preceding table in the same folder as EP-Launch - which is usually the folder that also has the EnergyPlus.exe program).
There are two command line methods to execute the transition version (from the Command Prompt). One is to simply use the file name you want transitioned (including .rvi or .mvi file names) or you can use a file name with a .lst extension and simply enter file names to be done in a text file. When you execute the transition program in this fashion, you will get the “typical” program defaults of a “full” transition, field names will be shown at each field with units, and any blank fields will be left blank rather than filled in with the current defaults.
Documentation content copyright © 1996-2026 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.