Application Guide for EMS — EnergyPlus 9.6

<< Prev | Table of Contents | Next >>

Sizing[LINK]

Sizing:Zone[LINK]

A series of actuators called “Sizing:Zone” is available. These offer a way to override the results of zone sizing calculations. The unique identifier for each is the name of the Zone Input object. The following control types are available:

  • Zone Design Heating Air Mass Flow Rate (kg/s)

  • Zone Design Cooling Air Mass Flow Rate (kg/s)

  • Zone Design Heating Load (W)

  • Zone Design Cooling Load (W)

  • Zone Design Heating Vol Flow (m3/s)

  • Zone Design Cooling Vol Flow (m3/s)

System Sizing[LINK]

A series of actuators called “Sizing:System” is available. These offer a way to override the results of air system sizing calculations. The unique identifier is the name of the AirLoopHVAC input object. The following control types are available:

  • Main Supply Volume Flow Rate (m3/s)

  • Main Supply Coincident Peak Cooling Mass Flow Rate (kg/s)

  • Main Supply Coincident Peak Heating Mass Flow Rate (kg/s)

  • Main Supply Noncoincident Peak Cooling Mass Flow Rate (kg/s)

  • Main Supply Noncoincident Peak Heating Mass Flow Rate (kg/s)

  • Main Heating Volume Flow Rate (m3/s)

  • Main Cooling Volume Flow Rate (m3/s)