I am confused about the differences between the different fan types. Can you explain?
In short:
Fan:ConstantVolume is a constant volume, continuous operation fan which can be turned on and off via a schedule.
Fan:OnOff is similar to the one above, but it cycles itself on and off as required by its thermostat … all during the scheduled operation period. This is a typical mode of operation for a home furnace.
Fan:VariableVolume runs continuously during the Schedule period, but varies its volume to meet the heating or cooling demand.
Consult the Input Output Reference document (group Fans) for additional information.
Fan Types[LINK]
I am confused about the differences between the different fan types. Can you explain?
In short:
Fan:ConstantVolume is a constant volume, continuous operation fan which can be turned on and off via a schedule.
Fan:OnOff is similar to the one above, but it cycles itself on and off as required by its thermostat … all during the scheduled operation period. This is a typical mode of operation for a home furnace.
Fan:VariableVolume runs continuously during the Schedule period, but varies its volume to meet the heating or cooling demand.
Consult the Input Output Reference document (group Fans) for additional information.
Documentation content copyright © 1996-2022 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.