A series of actuators called “Sizing:Zone” is available. These offer a way to override the results of zone sizing calculations. The unique identifier for each is the name of the Zone Input object. The following control types are available:
Zone Design Heating Air Mass Flow Rate (kg/s)
Zone Design Cooling Air Mass Flow Rate (kg/s)
Zone Design Heating Load (W)
Zone Design Cooling Load (W)
Zone Design Heating Vol Flow (m3/s)
Zone Design Cooling Vol Flow (m3/s)
System Sizing[LINK]
A series of actuators called “Sizing:System” is available. These offer a way to override the results of air system sizing calculations. The unique identifier is the name of the AirLoopHVAC input object. The following control types are available:
Main Supply Volume Flow Rate (m3/s)
Main Supply Coincident Peak Cooling Mass Flow Rate (kg/s)
Main Supply Coincident Peak Heating Mass Flow Rate (kg/s)
Main Supply Noncoincident Peak Cooling Mass Flow Rate (kg/s)
Main Supply Noncoincident Peak Heating Mass Flow Rate (kg/s)
Main Heating Volume Flow Rate (m3/s)
Main Cooling Volume Flow Rate (m3/s)
Sizing[LINK]
Sizing:Zone[LINK]
A series of actuators called “Sizing:Zone” is available. These offer a way to override the results of zone sizing calculations. The unique identifier for each is the name of the Zone Input object. The following control types are available:
Zone Design Heating Air Mass Flow Rate (kg/s)
Zone Design Cooling Air Mass Flow Rate (kg/s)
Zone Design Heating Load (W)
Zone Design Cooling Load (W)
Zone Design Heating Vol Flow (m3/s)
Zone Design Cooling Vol Flow (m3/s)
System Sizing[LINK]
A series of actuators called “Sizing:System” is available. These offer a way to override the results of air system sizing calculations. The unique identifier is the name of the AirLoopHVAC input object. The following control types are available:
Main Supply Volume Flow Rate (m3/s)
Main Supply Coincident Peak Cooling Mass Flow Rate (kg/s)
Main Supply Coincident Peak Heating Mass Flow Rate (kg/s)
Main Supply Noncoincident Peak Cooling Mass Flow Rate (kg/s)
Main Supply Noncoincident Peak Heating Mass Flow Rate (kg/s)
Main Heating Volume Flow Rate (m3/s)
Main Cooling Volume Flow Rate (m3/s)
Documentation content copyright © 1996-2014 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.