Running the EP-Macro
program[LINK]
The EP-Macro program is run automatically from the batch
files (RunEPlus or EPL-Run from EP-Launch). Skip this small
section if you are using either the RunEPlus batch file or
EP-Launch. If you wish to run it by hand, it is found in the
main folder of the EnergyPlus install (bin folder in the Linux
install). Note that in EP-Launch and other script files for
use with EP-Macro the convention is to name the file
<filename>.imf (input macro file). If you name it
<filename>.idf (input data file), the scripts will most
likely think it is a “normal” EnergyPlus input file and ignore
using EP-Macro on it - giving you a less than desireable
result.
Files used in EP-Macro program
| File Name |
Description |
| in.imf |
Input file containing the macro
commands |
| audit.out |
audit of the EPMacro run |
| out.idf |
Output file that can be run with
EnergyPlus |
The EP-Macro program is a Console Application, so to run by
hand you would need to open a command prompt in the Main
EnergyPlus install folder. Then, you would need to copy your
input file containing the macro commands from its folder to
this folder with the name “in.imf”. The installed name of the
EP-Macro program is “epmacro.exe”. After execution, you can
save the out.idf in an appropriate folder or rename it to
in.idf in order to execute EnergyPlus. You can view the
audit.out file for any errors that might have occurred during
EP-Macro processing.
Running the EP-Macro program[LINK]
The EP-Macro program is run automatically from the batch files (RunEPlus or EPL-Run from EP-Launch). Skip this small section if you are using either the RunEPlus batch file or EP-Launch. If you wish to run it by hand, it is found in the main folder of the EnergyPlus install (bin folder in the Linux install). Note that in EP-Launch and other script files for use with EP-Macro the convention is to name the file <filename>.imf (input macro file). If you name it <filename>.idf (input data file), the scripts will most likely think it is a “normal” EnergyPlus input file and ignore using EP-Macro on it - giving you a less than desireable result.
The EP-Macro program is a Console Application, so to run by hand you would need to open a command prompt in the Main EnergyPlus install folder. Then, you would need to copy your input file containing the macro commands from its folder to this folder with the name “in.imf”. The installed name of the EP-Macro program is “epmacro.exe”. After execution, you can save the out.idf in an appropriate folder or rename it to in.idf in order to execute EnergyPlus. You can view the audit.out file for any errors that might have occurred during EP-Macro processing.
Documentation content copyright © 1996-2026 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.