Table of Contents: External Interface(s) Application Guide — EnergyPlus 9.0
Table of Contents
All 9.0 Docs
|
Docs Home
|
EPx Home
External Interface(s)
Introduction
Coupling EnergyPlus with the Building Controls Virtual Test Bed
Algorithm for data exchange
BCVTB Examples
Architecture of System
XML Syntax
Example 1: Interface using ExternalInterface:Schedule
Creating the EnergyPlus idf file
Creating the configuration file
Example 2: Interface using ExternalInterface:Actuator
Creating the EnergyPlus idf file
Example 3: Interface using ExternalInterface:Variable
Creating the EnergyPlus idf file
Creating the configuration file
Coupling EnergyPlus with Functional Mock-up Units for co-simulation
Data exchange between EnergyPlus and FMUs
Case 1: Linking two systems through differential variables
Case 2: Linking two systems through algebraic and differential variables
Requirements
FMU Examples
Architecture of the FMU for co-simulation Import
Workflow of the FMU for co-simulation import
FMU Parser
Example 1: Interface using ExternalInterface:FunctionalMockupUnitImport:To:Schedule
Creating the EnergyPlus idf file
Example 2: Interface using ExternalInterface:FunctionalMockupUnitImport:To:Actuator
Creating the EnergyPlus idf file
Example 3: Interface using ExternalInterface:FunctionalMockupUnitImport:To:Variable
Creating the EnergyPlus idf file
Exporting EnergyPlus as a Functional Mock-up Unit for co-simulation
References
Documentation content copyright © 1996-2018 The Board of Trustees of the University of Illinois and the Regents of the University of California through the Ernest Orlando Lawrence Berkeley National Laboratory. All rights reserved. EnergyPlus is a trademark of the US Department of Energy.
This documentation is made available under the EnergyPlus Open Source License v1.0.